Inverter Welding Machine JET TIG III AC/DC 200 3w1 IGBT PFC PLASMA Welder Fantasy + Welding Torch PARKER

Item internal code: JET TIG III 200

PRODUCER: FACHOWIEC F.H.W.
WARRANTY: FACHOWIEC F.H.W.

Welder Fantasy is a brand created by the company FACHOWIEC in 1991. The TIG/MMA inverter welding machines, MIG/MAG semi-automatic welding machines, plasma cutters and other equipment which come with the Welder Fantasy trademark have been acclaimed by thousands of workshops and companies in Poland and abroad for many years.

The Welder Fantasy brand means:

- Highest-quality equipment,

- Guarantee of reliability,

- High level of performance,

- Leader on the Polish market.

The newest TIG welding machine on polish market! Previously unavailable functions are now accesible in super atractive price!

	IGBT technology (Insulated Gate Bipolar Transistor) – this is a modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field-effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has a significant impact on extending the reliable operation time of the welding equipment.
	High efficiency of 60%,

The Welder Fantasy JET TIG III industrial welding machines are microprocessor-based welding power sources based on IGBT technology. The welding machines are designed for welding carbon, stainless and acid-resistant steels, as well as copper, brass, magnesium, titanium, all aluminium alloys and can also be used for plasma cutting.

The machines are equipped with PFC (Power Factor Correction) module which increases the power factor to a value as close to 100% as possible, in order to reduce power losses in transmission lines.

"WELDER FANTASY" IS A PROTECTED AND REGISTERED TRADEMARK – see the Certificate of Registration.

The machines are equipped with PFC (Power Factor Correction) module which increases the power factor to a value as close to 100% as possible, in order to reduce power losses in transmission lines.

A welding machine of the highest quality that sets new standards among AC/DC welders, with a user-friendly control panel which ensures all the necessary welding parameters can be easily selected.

Welding machine was awarded at the IX International Fair of Welding Technology And Equipment WELDING Kielce 2014.

The JET TIG III AC/DC 200 device allows for welding using the following methods:

	TIG DC lift-arc - with the TIG method, the electric arc is ignited under an inert gas (argon) shield, between the welded element and the non-fusible electrode made of pure tungsten or tungsten with additives. In the TIG lift-arc mode, the arc is ignited when the electrode comes into contact with the workpiece. In the TIG DC mode, the current is constant.
	TIG DC HF - in order to completely eliminate the possibility of contaminating the joint with tungsten, it is recommended not to touch the workpiece with the electrode. To achieve this goal, contactless arc ignition with high-frequency discharges generated by the built-in ionizer is used.
	TIG DC PULSE lift-arc - arc ignition occurs through contact of the electrode with the workpiece. The pulse function allows the welding of thin components through periodic current changes.
	TIG DC PULSE HF - HF contactless ignition with the ionizer takes place in the TIG DC PULSE mode.
	TIG AC lift-arc - a function that enables aluminium welding with an alternating current, which performs the function of cathodic cleaning in the aluminium welding process. Thanks to the AC BALANCE parameter setting, it is possible to adjust the ratio of the duration of mutual phases.
	TIG AC HF - a similar function enabling aluminium welding with an alternating current. Arc ignition occurs without contact, due to the high-frequency current generated by the ionizer.
	TIG AC PULSE lift-arc - this welding process utilises the combination of an alternating current and pulses, allowing very thin aluminium elements to be welded. The arc is ignited by contact of the electrode with the workpiece.
	TIG AC PULSE HF - a function enabling thin elements made from aluminium to be welded. Non-contact ignition occurs through the use of the ionizer.
	TIG AC + DC - the ADVANCED AC function enables AC/DC mixed welding. There is a transition between AC and DC of negative DC polarity (-) in a single welding cycle. This cycle is repeated throughout the entire welding process. Mixed current welding is especially useful when joining parts of different thickness, and noise emissions are also reduced compared to conventional AC welding.
	PLASMA CUT - a function enabling the cutting of electrically conductive parts made of carbon steel, alloy steel, aluminium and its alloys, brass, copper and cast iron.
	MMA DC+ - coated electrode welding method, where the electrode is comprised of a metal core covered with a special coating. An electric arc is maintained between the end of the electrode and the workpiece. The arc is ignited by touching the workpiece with the tip of the electrode. MMA DC+ involves welding with positive polarity, and as a result more heat is generated in the material and less on the electrode.
	MMA DC- - the difference compared to MMA DC+ is that the polarity in the MMA DC- mode is negative, so the heat distribution is inverted, resulting in more heat being generated on the electrode and less in the welded material.
	MMA VRD DC+ - the VRD (Voltage Reduction Device) function available in MMA mode is a module that reduces the quiescent (no-load) voltage of the secondary circuit of the welding machine. This function increases safety and reduces the risk of electric shock. The VRD function turns the welding power off and on when the resistance between the electrode and the welded workpiece is measured during welding.
	MMA VRD DC- - available in the MMA DC- mode, the VRD (Voltage Reduction Device) function works in the same way as with MMA VRD DC+, with the only difference being the negative polarity.

With TIG welding, the following welding modes can be activated:
* Through the LIFT-ARC ignition system (2T and 4T)
* Contactless HF ignition (2T and 4T)
* With a remote control pedal (2T and 4T)

NEW PANEL FUNCTIONS:

- AC/DC EASY SETUP - pre-programmed factory settings
- NORMAL SETUP - welding parameters adapted to individual needs
- WAVEFORM SELECTION:
* ADVANCED SQUARE - rectangular
* SOFT SQUARE - trapezoidal
* TRIANGULAR - triangular
* SINE - sinusoidal
- ADVANCED AC - AC/DC mixed welding
- MMA full control
- PFC
- VRD
- HOT START TIME
- HOT START AMPS
- PLASMA CUTTING
- PLASMA Pilot Arc (HF)
- GAS TEST

WELDING MACHINE SPECIFICATIONS:

* compact design,
* small dimensions and low weight,
* IGBT transistors,
* 60% efficiency,
* easy-to-use control panel,
* LCD display for welding parameters,
* LCD display for individual programs,

* possibility to save 9 complete user programs,
* very wide selection of welding functions:

- HF - the device is equipped with an ionizer that allows for contactless arc ignition.

- PRE i POST GAS - regulation of the shielding gas outflow time before welding start-up and after welding completion.

- UP i DOWN SLOPE - the rise and fall of the welding current.

- STANDARD AC/DC - pulsating current function is used mainly for joining thin metal sheets of 0,1mm thickness, low melting metals like lead, or welding in forced positions. Another advantages of pulse welding are: smaller heat input, better arc stability, greater depth of penetration and and a nicer final effect of the weld face itself.

- ADVANCED AC – function enables AC/DC mixed welding. There is a transition between AC and DC of negative DC polarity (-) in a single welding cycle. This cycle is repeated throughout the entire welding process. Mixed current welding is especially useful when joining parts of different thickness, and noise emissions are also reduced compared to conventional AC welding.

- HOT START - a function facilitating welding start-up. When the arc ignites, the welding current is temporarily increased to heat up the material and the electrode at the point of contact, and to properly shape penetration and the weld face in the initial stage of welding.

- ARC FORCE - an arc-stabilising function, achieved by maintaining the arc voltage value, regardless of its length, and facilitating control over the amount of spatter.

PANEL FUNCTIONS:

* MMA current,

* TIG AC current,

* TIG DC, PULSE current,

* pre-gas, post-gas,

* UP and DOWN SLOPE – the rise and fall of the welding current,

* HOT START,

* MMA ARC FORCE,

* 2-CYCLE and 4-CYCLE,

* contactless HF ignition, and through LIFT rubbing,

* possibility to connect a remote control, e.g. control pedal, gun equipped with a potentiometer,

* dual-function ADJUST knob (coarse and fine adjustment),

* waveform selection:

	ADVANCED SQUARE - the rectangular shape of the AC wave allows for welding of aluminium alloys containing magnesium,
	SOFT SQUARE - the trapezoidal shape of the AC wave allows for welding of aluminium alloys containing silicon,
	TRIANGULAR - the triangular current wave setting is optimal for welding thin components, including anodized aluminium,
	SINE - the sinusoidal waveform is recommended for welding 99.999% pure aluminium.

THE COMPLETE KIT INCLUDES:

- Welder Fantasy JET TIG III AC/DC 200 IGBT power source,
- welding gun – PARKER SUREGRIP SGT26 FLEX TIG SRT 26-4m, with welding current adjustment,
- ground cable 3m,
- cable with electrode holder 3m,
- P80-4m plasma welding torch,
- additional consumables (nozzles, connectors, sleeves, electrodes),
- Plasma Torch Roller Guide Wheel,
- compressed air filter/regulator,
- User Manual in Polish plus Warranty Card.

TECHNICAL DATA:

  Continue shopping