ELIPSE INTEGRA ABE1P3 - Half Mask Paint Respirator with Safety Goggle S/M

A light and comfortable mask with protective goggles dedicated to the paint industry. The mask is free of latex and silicone elements. It has carbon cartridges and a particulate filter to protect against solid and liquid particles, e.g. dust and mist, as well as vapors and organic gases. The product complies with EN 140: 1998. APF: 20. The safety goggles meet the requirements of the EN 166 standard. They provide excellent distortion-free visibility, 180-degree field of view. They protect against dust, dust and liquid splashes. Equipped with scratch-resistant and damage-resistant lenses (GVS 2.F.K GOGGLE glass marking – EN 166 3.F) and an elastic headgear strap with adjustable length.

The goggles have built-in direct ventilation. They meet the requirements of optical class 2 and 3 - they can be used intermittently during operation. They provide protection against low-energy impacts (class F - withstand the impact of a steel ball with a nominal diameter of 6 mm and a minimum weight of 86 g, hitting at a speed of 45 m/s) and are scratch-resistant (K - symbol of resistance to surface damage by fine dust particles) Comfortable wide frames with soft, padding are tight and fit snugly on the face.

The ELIPSE INTEGRA ABE1P3 RD half mask is available in size S/M

Features:

- small size

- low weight

- eye protection

- adjustable headgear straps

- replaceable absorbers

On offer at other auctions replaceable refills for ELIPSE masks.

Technical data:

- application: ABE1P3 filter is a protection against aerosols of solid and liquid particles (dust, fog and fumes), particles > 0.3μm, gases and vapours of organic compounds with a boiling point of > 65 °C, gases and vapours of inorganic compounds and acidic gases and vapours

• A Organic vapours and gases with a boiling point above 65 °C
  
• B Fumes and inorganic gases (excluding carbon monoxide)
• E Sulphur dioxides and other acidic vapours and gases
• P Dust

- filter type: ABE1P3 - HESPA® P3; granular activated carbon absorber replaceable

- filter efficiency: 99,95%

- meets the requirements of the standards: half mask - EN140: 1998 filter absorber ABE1P3 - EN14387:2004+A1:2008, D- meets the requirements of the dolomite dust clogging test

- materials: half mask: TPE (thermoplastic elastomer) silicone and latex-free material, fragrance-free and anti-allergic

- valve design: nylon

- valve discs: silicone

- internal leakage of the complete half mask: 0.18%

- CO2 concentration inside the half mask: 0.10%

- safety goggles meet the requirements of EN 166

- glass resistant to scratches and mechanical damage (marking from the glass of goggles GVS 2.F.K – EN 166 3.F)

- goggles meet the requirements of the 2nd and 3rd optical class

- provide protection against low-energy impacts (class F - withstand the impact of a steel sphere with a nominal diameter of 6 mm and a minimum weight of 86g, hitting at a speed of 45 m / s)

- scratch-resistant (K - symbol of resistance to surface damage by fine dust particles)

- weight:

• half mask with goggles: 401,6 g
• filter absorber: 83,4 g
• complete half mask: 485 g

- actual protection factor: 20 x NDS* for dust and fumes, 10 x NDS* for gases and vapours of organic compounds

- Storage time: 3 years under conditions according to the instructions

HESPA® - a new synthetic filter material with the lowest breathing resistance and excellent filtration properties. This material does not lose its high filtration properties even in conditions of high humidity. The P3(R) HESPA+ filter is lighter and more durable than conventional fiberglass filters.

Small size - the smallest reusable ABE1P3 half mask fits perfectly under visors and other face protection.

One universal size - tests carried out by an independent research unit have shown that for 90% of respondents a universal size of the half mask is sufficient, ensuring very high tightness and thus safety of its use.

Small half mask with a large exhalation check valve - this is a very low CO2 concentration (0.10%) inside it ensuring less fatigue.

Wide elastic tapes - with an extended headrest cap ensure safe and comfortable wearing of the half mask - the tapes do not interfere with the headings of visors and other protection.

Pre-filter - protection against rapid dirt or clogging of the dust filter, e.g. during spray painting, is provided by additional filters. To install pre-filters on A1P3 filters, special openwork lids are used.

ATTENTION !!!

Pre-filters and lids are not included, they must be purchased separately.

Use as a personal protective equipment in:

- paint industry

- metallurgical industry

- stone industry

- wood industry

- extile industry

- paper industry

- glass industry

- rubber industry

- plastics industry

- construction

- agriculture (spraying, veterinary medicine)

- in metalworking

- welding plants

- production

- DIY

  Continue shopping